A quiet, running toilet is usually a leak you can test

EPA WaterSense leak-check guidance uses a simple dye test. Put dye or food coloring in the tank water. Do not flush. Wait 10 minutes. If color appears in the bowl, the tank is leaking, often through a worn flapper. If water spills into the overflow tube, check the fill valve or the water-level setting.

Updated .

Tell the two parts apart on the flapper vs fill valve page. A backup in several fixtures belongs on the clogged drain page.

At a glance

StepWhat to look for
Dye in the tank, no flushWait 10 minutes
Color in the bowlLikely a flapper or flush-valve leak
Water into the overflow tubeFill valve or water-level setting
Cracks, floor water, stuck shutoffCall a licensed plumber

EPA WaterSense leak-check guidance uses a simple dye test. Remove the tank lid. Put a dye tablet, or several drops of food coloring, in the tank water. Do not flush. Wait 10 minutes. If color appears in the bowl, water is leaking from the tank, often through a worn flapper or flush-valve seal. Flush when you are done so the dye does not sit and stain. If the water level in the tank is high enough that it spills into the overflow tube, the fill valve or the water-level setting may be the problem instead. See flapper or fill valve.

A running toilet wastes water even when you cannot hear it. If you cannot reach the parts, if the tank or bowl is cracked, if water is on the floor, or if a new flapper does not stop the leak, call a licensed plumber.

When to stop and call a professional

Stop if a supply line is spraying, if the shutoff valve at the wall will not close, or if you are not comfortable lifting the tank lid. Shut off the water at the wall valve if you can, and call a plumber.

Sources

Common questions

How long do I wait in a toilet dye test?

10 minutes, without flushing, according to WaterSense leak-check guidance.

What does color in the bowl mean?

Water is leaking from the tank, often through a worn flapper or flush-valve seal.

What if water is running into the overflow tube?

The fill valve is not shutting off, or the float is set too high. See the flapper vs fill valve page.

When should I call a plumber?

If you cannot reach the parts, the tank or bowl is cracked, water is on the floor, the shutoff valve will not close, or a new flapper does not stop the leak.