Start with a first check, and know when to stop

These pages collect official first steps: a WaterSense dye test for a running toilet, paint math from the coverage rate on your can, EPA and CDC pest steps, and NFPA and CPSC smoke-alarm maintenance. They are not a substitute for a licensed professional. No page here tells you how to mix pesticides or drain chemicals.

Updated .

Also see flapper vs fill valve, mice, cockroaches, window condensation, and clogged drains.

At a glance

First checkOfficial starting point
Running toilet10-minute WaterSense dye test
Paint quantityCoverage from the can; 350 is only a rough estimate
PestsFood, water, and entry points first; no mix recipes here
Smoke alarmsTest monthly; replace the unit at 10 years

These pages collect official first steps: an EPA WaterSense dye test for a running toilet, paint-area math using the coverage rate on your can, EPA and CDC pest steps that start with food, water, and entry points, and NFPA and CPSC smoke-alarm maintenance. They are not a substitute for a licensed plumber, painter, pest professional, or electrician. No page here tells you how to mix pesticides or drain chemicals.

Paint quantity calculator

Sources

Common questions

How do I test a running toilet?

EPA WaterSense leak-check guidance uses a dye test: color in the tank, wait 10 minutes without flushing, and see whether color appears in the bowl.

How much paint do I need?

Start with the coverage number on the can. There is no official government figure for square feet per gallon. PaintCare notes that 300 to 400 is common, and 350 is a rough estimate if you do not have the label.

Should I start with a pesticide for ants or mice?

EPA’s safe-pest-control guidance says to try starving, drying, and keeping pests out before a pesticide. This site does not tell you how to mix or apply insecticides.

How often should I test a smoke alarm?

NFPA says to test every alarm at least once a month with the test button, and to replace the unit after 10 years.