Fog on the glass is usually indoor moisture, not always a broken window
Condensation appears when moist indoor air meets a cold glass or frame. EPA says to control moisture, because damp materials can support mold. Ventilate kitchens and bathrooms, run exhaust fans, and fix plumbing leaks. Fog between two panes that does not wipe off may mean the seal has failed.
Updated .
If you later paint a sill, use the paint calculator and read the sheen notes, including EPA lead guidance for pre-1978 homes. Plumbing leaks also appear on the drain page.
At a glance
| What you see | First reading |
|---|---|
| Fog on the room side, cold morning | Often indoor moisture; may clear as the glass warms |
| Fog between sealed panes | The seal may have failed |
| Pooling or staining on the sill | Look at humidity, weatherstripping, and the window |
| Pre-1978 painted sills | See EPA lead guidance before scraping |
Condensation appears when moist indoor air meets a cold glass or frame surface. EPA's mold-and-moisture guidance says it is important to control moisture in the home, because damp materials can support mold. Ventilate kitchens and bathrooms to the outdoors, run exhaust fans, use a bathroom fan during and after showers, fix plumbing leaks, and do not let wet clothes or firewood load the indoor air. A short-lived film on a single-pane window on a very cold morning can clear as the glass warms. Water that pools on the sill, stains the sash, or returns every day is a reason to look harder at humidity, weatherstripping, and, in some cases, the window itself.
ENERGY STAR's window guidance also points to ventilation and to window treatments that still allow air to move along the glass. This page does not diagnose a failed sealed insulated-glass unit from a photograph. If the fog is between two panes and does not wipe off on the room side, the seal may have failed; a window professional can check that.
When to stop and call a professional
Call a professional if you see peeling paint, soft wood, mold that keeps returning, or condensation between sealed panes. If the home predates 1978, disturbing painted sills may raise lead-paint issues; see EPA's lead pages before you scrape.
Sources
Common questions
Does window fog always mean the window is broken?
No. A short-lived film on a single-pane window on a very cold morning can clear as the glass warms. If the fog is between two panes and does not wipe off on the room side, the seal may have failed.
What should I do about indoor moisture first?
Ventilate kitchens and bathrooms to the outdoors, run exhaust fans during and after showers, fix plumbing leaks, and avoid drying wet clothes or storing firewood in a way that loads the indoor air.
When is pooling water on the sill a bigger problem?
Water that pools on the sill, stains the sash, or returns every day is a reason to look harder at humidity, weatherstripping, and, in some cases, the window itself.
What if the home predates 1978 and I need to scrape a sill?
Disturbing painted sills may raise lead-paint issues. See EPA’s lead pages and the renovation, repair, and painting program before you scrape.